install CS-MARS 20 on vmware
Instructions for installing CS-MARS 4.2.x (model 20, others should be similar) in
VMWare.
The procedure is written for MARS 4.2.x (checked with csmars-4.2.7.2521.iso), there are
some differences in 5.x.
Information provided is for local controller, didn’t try global controller installation
(needs different emulated HW, I think model 20 is enough for learning purposes)…
VMWare version I used was VMWare Server 1.0.3 for Linux, but it should probably work with
other versions as well.
Create new virtual machine in VMWare, based on Red Hat Linux (follow the IPS guide - remove
floppy, 512 MB RAM is enough, …), just make sure you use 120 GB IDE 0:0 hard disk and
CDROM IDE 0:1, two ethernet adapters. Close VMWare console, open file describing virtual
machine and add the following two lines:
ethernet0.virtualDev = “e1000″
ethernet1.virtualDev = “e1000″
Point CD to iso image (I tried with csmars-4.2.7.2521.iso and csmars-4.2.6.2458.iso, they
both work the same).
Run the machine, choose local controller, model 20, wait, reboot, wait, wait, wait, wait
until login prompt appears (oracle install takes a lot of time).�
Login with pnadmin/pnadmin, change password, set IP address (with “ifconfig eth0 x.x.x.x m.m.m.m”,
x.x.x.x is IP, m.m.m.m is mask, machine reboots).
While virtual machine is starting (when you see output of VMWare BIOS), hold down Shift key (if
it says Keyboard stuck, press F1 to continue). Now you got to the LILO prompt, quickly press some
key (”a” would be fine) - if you don’t press anything, machine boots in a second or two…
Now that you have time, write “linux rw init=/bin/bash” (without quotation marks) and press
Enter. When you are in the shell, write the following commands:
HP0-095
HP0-P16
HP0-X01
—————–
mount /dev/hda5 /opt
cd /opt/janus/release/bin
mv pnlicense pnlicense.org
echo “/bin/echo d84f7ceaf50f9c45683e2efb77752d4f:License verified:4:0:0:4″ > pnlicense
chmod +x pnlicense
cd
umount /opt
—————–
Double check the echo command for typing errors!
Reboot the virtual machine (or power it off and on again).
Go to your browser, login with pnadmin account, enter any license (numbers are OK) and you should
be presented with a working CS-MARS20 installation.
70-282
70-445
70-292
Have done my MCDBAand I really want to focus that what company really want to see in me and what kindof responsibilites lies on me after being MCDBA. They have Microsfot shop enviornment and I really want to be more useful for them and want to have more good expereince of being myself as MCDBA.
70-290 MCDBA Managing and Maintaining a Microsoft Windows Server 2003 Environment 70-310 MCDBA XML Web Services and Server Components with Visual Basic.NET 70-316 MCDBA Developing and Implementing Windows-based Applications with Microsoft Visual C# .NET
MCDA or Meca Croniam Digital Analyzer is the supreme particle that holds the very fabrication of the universes.
You cannot do business with them directly you have to communicate with them through the Focalight Projector.
If you attempt to communicate with them directly, you will be vaporized.
Related Articles:
Nortel 920-461 Certification is a very important exam in the field of nortel certification.the only metarial providers which is pass4sure 65 questions showed the change of the content about 920-461 between now and before.It’s published just now,it’s the single metarial.
By the way,where do you get the exam metarial when you prepare to take the exam 920-442?it’s the worst way for you to serach for many website.it waste much energy.come to pass4sure quicklily.
1.A company has a Succession 1000/1000M Rls. 3.0 system with 900 users at the Main Office. They have acquired another company with 850 users and will deploy another Succession 1000/1000M Rls. 3.0 system at that site. They want users to keep their existing telephone extensions, although there are some extension numbers that are identical on both sites. Which solution will accommodate the customer’s requirements?
A: Virtual Office Feature (VO)
B: Uniform Dialing Plan (UDP)
C: Vacant Number Routing (VNR)
D: Coordinated Dialing Plan (CDP)
E: Transferable Directory Numbers (TNDNs)
Correct Answers: B
2.A company is deploying a two-site Succession 1000 Rls. 3.0 system to take advantage of their existing managed IP backbone which is currently being used for data traffic only. They are installing Layer 2 switches to connect the Succession 1000 Rl.s 3.0 components and will interconnect them with the IP backbone via routers. The WAN connection to each site is a 1.544 Mbps PPP link through the routers. The users will have i2002, i2004 Internet Telephones and M3903 digital telephones. To ensure that VoIP packets are handled appropriately in the network, QoS has been enabled in the Layer 2 switches and routers using a combination of IEEE 802.1p and Differentiated Services (DiffServ). Which three components should be configured to mark the VoIP packets going into the network to ensure that voice packets receive the appropriate priority? (Choose three.)
A:M3903 Digital Telephones
B:Call Server TLAN interface
C:Call Server ELAN interface
D:i2002 and i2004 Internet Telephones
E:Succession Media Card ELAN interface.
F:Signaling Server Telephony LAN (TLAN) interface
G:Signaling Server Embedded LAN (ELAN) interface
H:Voice Gateway Media Cards (VGMC) TLAN interface
Correct Answers: D, F, H
3.A company has a Succession 1000 Rls. 3.0 system deployed at site A and site B. They have just implemented a call center with 100 agents at site A and have installed Symposium Express Call Center 4.2. They have a third party voice mail system installed, as well as a third party database to store customer data. They want to deliver customer data from their third party database to their agent’s screens on incoming calls, keyed on the number that the customer is calling from. Which two recommendations should you make to satisfy the customer needs? (Choose two.)
A:Install Symposium Agent 2.3.
B:Install Symposium Web Client 4.0.
C:Install Symposium Web Center Portal 3.0.
D:Upgrade to Symposium Call Center Server 4.2.
E:Install Symposium TAPI Service Provider 2.3.1.
F:Replace the third-party voice mail system with Call Pilot 2.0.
Correct Answers: A, E
4.A company has a Succession 1000 Rls. 3.0 system with 650 users at the Main Office (site A) and 350 users at the Branch Office (site B). They have Symposium Express Call Center (SECC) 4.2 at site A with 100 agents and five supervisors. They plan to add another 25 agents at site A and 300 agents at site B. These two call centers will run completely separate businesses that require skill set routing at both sites and do NOT share resources. Which two changes are necessary? (Choose two.)
A:Install an additional Branch Office at site B.
B:Upgrade the SECC 4.2 to SCCS 4.2 at site A.
C:Install a Symposium Call Center Server (SCCS) 4.2 at site B.
D:Upgrade the Branch Office at site B to a Succession 1000 Rls. 3.0 system.
E:Install an NCC server at site A. Install a SCCS 4.2 at site B and network it with the SECC 4.2 at site A.
F:Install a Network Control Center (NCC) server at site B. Install a SCCS 4.2 at Site B and network it with the SECC 4.2 at site A.
G:Install a NCC at site A and upgrade the SECC 4.2 to SCCS 4.2. Install a SCCS 4.2 at site B and network it with the SCCS 4.2 at site A.
Correct Answers: C, D
It’s named nncde alteon security exam,pass4sure provided some metarial for all the candidate.iincluding 146 questions and answers, released at 2007-2-12.
Preparing for the 920-461 exam? Searching 920-461 Test Questions, 920-461 Practice Exam, 920-461 Dumps?
It’s very easy for every person to pass Nortel 920-461 exam,Because Pass4sure released all the questions about the nortel 920-440 exam,you can memorize the anwsers,and you can pass the exam very easily.
Nortel 920-461 exam named nncde wireless lan,the questions is single choice,and the english language is english.
