install CS-MARS 20 on vmware
Instructions for installing CS-MARS 4.2.x (model 20, others should be similar) in
VMWare.

The procedure is written for MARS 4.2.x (checked with csmars-4.2.7.2521.iso), there are
some differences in 5.x.

Information provided is for local controller, didn’t try global controller installation
(needs different emulated HW, I think model 20 is enough for learning purposes)…

VMWare version I used was VMWare Server 1.0.3 for Linux, but it should probably work with
other versions as well.

Create new virtual machine in VMWare, based on Red Hat Linux (follow the IPS guide - remove
floppy, 512 MB RAM is enough, …), just make sure you use 120 GB IDE 0:0 hard disk and
CDROM IDE 0:1, two ethernet adapters. Close VMWare console, open file describing virtual
machine and add the following two lines:

ethernet0.virtualDev = “e1000″
ethernet1.virtualDev = “e1000″

Point CD to iso image (I tried with csmars-4.2.7.2521.iso and csmars-4.2.6.2458.iso, they
both work the same).

Run the machine, choose local controller, model 20, wait, reboot, wait, wait, wait, wait
until login prompt appears (oracle install takes a lot of time).�

Login with pnadmin/pnadmin, change password, set IP address (with “ifconfig eth0 x.x.x.x m.m.m.m”,
x.x.x.x is IP, m.m.m.m is mask, machine reboots).

While virtual machine is starting (when you see output of VMWare BIOS), hold down Shift key (if
it says Keyboard stuck, press F1 to continue). Now you got to the LILO prompt, quickly press some
key (”a” would be fine) - if you don’t press anything, machine boots in a second or two…
Now that you have time, write “linux rw init=/bin/bash” (without quotation marks) and press
Enter. When you are in the shell, write the following commands:
HP0-095
HP0-P16
HP0-X01
—————–
mount /dev/hda5 /opt
cd /opt/janus/release/bin
mv pnlicense pnlicense.org
echo “/bin/echo d84f7ceaf50f9c45683e2efb77752d4f:License verified:4:0:0:4″ > pnlicense
chmod +x pnlicense
cd
umount /opt
—————–

Double check the echo command for typing errors!

Reboot the virtual machine (or power it off and on again).

Go to your browser, login with pnadmin account, enter any license (numbers are OK) and you should
be presented with a working CS-MARS20 installation.
70-282
70-445
70-292

Training for the Cisco 642-426 Troubleshooting Unified Communications TUC certification exam is the exam associated with the CCVP certification. Candidates can prepare for this exam by taking the Troubleshooting Cisco Unified Communications TUC 1.0 training course. The exam will certify that the successful candidate has the knowledge and skills necessary to troubleshoot Enterprise CallManager, Unity, and IP network deployments. The exam addresses hands-on experience in configuring, deploying, and troubleshooting Unified Communications solutions.
310-083
642-481
70-282
Our training equips network professionals with the knowledge and skills required to troubleshoot Unified Communications systems/solutions in enterprise, mid-market, and commercial deployments. Learn troubleshooting methodology, triage, resources, tools, and fixes at the integrated system/solution level, as well as for components such as Cisco Unified CallManager, Cisco Unity, videoconferencing, and network infrastructure.
Get Paid to Blog About the Things You Love

TUC Training Includes
30 hours of instructor led full multi-media interactive training. The recorded version of the live now training Calendar of Live

Live Now Class Schedulecourse.
One year unlimited access to Online Live Classes and recorded version 24 x 7.
Our courseware provides a wholly different ? and uniquely effective ? learning experience.
Train at your own pace, when you want to at Home or at Work
Engaging course demos and real-world examples
Review questions to test one’s retention
Training conducted by Cisco Authorized Trainers with at least 10 years of experience in the field. CCIE and Double CCIE Credentials
Cisco Authorized Training - Guarantees you always getting the finest training available
Also Available
Live Cisco TUC Training Class
Cisco CCVP Boot Camp Class
TUC Certification Training Course Content
Apply the Cisco recommended methodology used to determine general Unified communications system problems and issues
Describe the steps that can be used to identify a problem with a given unified communication system
Identify tools that can be used to identify and isolate problems
Correlate events (using traces, logs, and monitoring tools to identify the problem)
Parse and interpret trace logs and system logs
Troubleshoot call setup issues
Troubleshoot PSTN call setup issues
Troubleshoot intersite call setup issues
HP0-729
70-529
MB3-530
PW0-300
70-542
Troubleshoot intrasite call setup issues
Troubleshoot registration issues
Troubleshoot issues with endpoint registration
Troubleshoot issues with gateway registration
Troubleshoot issues with gatekeeper registration
Troubleshoot database issues
Troubleshoot database replication issues in CallManager 4.x
Troubleshoot database replication issues in CallManager 5.x
Troubleshoot 3rd party LDAP synchronization issues
Troubleshoot application issues
Troubleshoot voicemail integration
Troubleshoot CTI integration issues
Troubleshoot IP phone XML services
Troubleshoot media resources
Troubleshoot music on hold
Troubleshoot conference bridges
Troubleshoot transcoders
Troubleshoot MTP
Troubleshoot voice quality issues
Troubleshoot echo
Troubleshoot dropped calls
Troubleshoot audio quality issues
Troubleshoot security issues
Troubleshoot authentication issues
Troubleshoot certificate issues